[China Glass Net] The role of the full UV film and the importance to the owners of the car is self-evident. However, most car owners do not know much about the daily maintenance of automotive films. I would like to remind all car owners that the car's full UV film is also used in the same way as the car. It must pay attention to daily maintenance. If it is properly maintained, it will help to extend the life of the car film and improve its use. Today Xiaobian tells everyone about the daily maintenance methods of the full UV film:
1. In order to ensure that the automobile film and the glass are completely adhered after the film is applied, the automobile film cannot be cleaned and the demisting line switch is turned on within one week. Try not to let the sun directly expose the glass, which will cause the result of foaming. The air conditioner inside the car should be turned on to allow the air to circulate inside and outside, and the natural resilience of the car film itself is formed to ensure the complete bonding of the rubber and the glass after the car film is installed. In order to form a safety explosion-proof effect.
2. After the film is applied, a little water will inevitably remain between the automobile film and the glass, which may cause small bubbles or slight wave marks, which may cause blurred vision. This is normal. After sun exposure, it will disappear naturally after 4 to 10 weeks. If there is still a clear phenomenon after a period of time, be careful not to deal with it yourself, you should look for a professional technician.
3. When cleaning the glass, disable the acid-alkaline solvent cleaning, and try not to let the oily liquid of the leather oil adhere to the automobile film. The cleaning method can be clean water or non-acid-alkaline cleaning liquid on the market. Most glass cleaners are good for cleaning automotive films. The more suitable cleaning solution for automotive films is water and household cleaning products diluted in a ratio of 10 to 1.
4, the surface hardening of automotive film is limited, in order to avoid scratching the car film, do not use brush, sandpaper and other hard particles of cleaning supplies, use soft cloth or sponge to clean the car film surface is correct. Clean the Fabric outside the body, and do not use it to wipe the car film. Because the fabric used outside the car body is easy to carry fine sand, it is also one of the factors that cause the car film to scratch.
Pv Fleece,Pv Fleece Fabrics,Textile Fabrics Pv Fleece,Pv Velvet Fabric
SUZHOU JINYULAI TEXTILE CO.,LTD , https://www.jyltextile.com